G-Spot Engineering & Mechanical in Collinsville can perform a range of radiator repairs on most vehicles, including:

 Car engine cooling system failures rank among the top three causes of roadside breakdowns in Australia, with radiator failures accounting for a large percentage of these.

A fully functional radiator and cooling system is essential in preventing overheating, which can cause expensive breakdowns and may result in serious engine damage. Modern engines also operate more efficiently within specific temperature ranges.

Not all cooling system failures are explosive in nature; in most cases it's a slow process that may start with you noticing puddles under the car or having to top off the coolant level regularly. These are often signs your radiator may be leaking.

The temperature gauge may indicate a high coolant temperature in slow traffic but returns to normal during high speed driving. In some cases, you may notice a sweetish, “hot water” smell coming from the engine, or even notice actual steam coming from under the bonnet. All these symptoms are serious and should not be ignored. 

Not only do we replace radiators in cars but we also replace Truck Radiators at G-Spot Engineering & Mechanical. Here is one we did recently.

All Repco Authorised Service centres employ highly trained technicians who are qualified to spot and correct problems which not only affect radiators, but all parts and components of modern engine cooling systems.

When you have your cooling system inspected at a Repco Authorised Service centre, you gain the peace of mind that comes with knowing your vehicle's cooling system is up to the task of keeping your engine running at optimal temperatures.

We answer some commonly asked questions about causes of radiators and cooling systems failure, click here to read out article. You can call us today for a cooling system check. 

As a Repco Authorised Service centre, G-Spot Engineering & Mechanical are fully qualified to service your new car and protect your new car warranty. You'll enjoy the friendly service you expect from a local and trusted independent service centre, combined with the reassurance of the Nationwide Warranty by Repco Authorised Service.

A fully functional radiator and cooling system is essential in preventing overheating that can cause expensive breakdowns and serious engine damage. G-Spot Engineering & Mechanical can check your radiator and cooling system for problems and advise you of your best options...

Cooling System & Radiator Service in Collinsville

Radiator failure in vehicles can be attributed to several factors. The most common causes include:

Corrosion: Over time, rust and sediment build up inside the radiator, leading to blockages and reduced efficiency.

Leaks: Damaged hoses, seals, or the radiator itself can result in coolant leaks.

Blockages: Debris and sludge can accumulate and obstruct the flow of coolant.

Overheating: Insufficient coolant or a malfunctioning thermostat can cause the engine to overheat, putting excessive strain on the radiator.

Wear and Tear: Regular use can naturally degrade the radiator components over time.

At G-Spot Engineering & Mechanical in Collinsville, we specialise in diagnosing and repairing radiator issues to keep your vehicle running smoothly.

Milky coolant is often a sign of contamination, typically from oil mixing with the coolant. This can happen due to:

Blown Head Gasket: A common cause where the gasket fails, allowing oil and coolant to mix.

Cracked Engine Block or Cylinder Head: Severe damage can lead to internal leaks.

Transmission Fluid Leak: In vehicles with a transmission cooler integrated into the radiator, a leak can cause cross-contamination.

If you notice milky coolant, it's crucial to visit G-Spot Engineering & Mechanical in Collinsville immediately for a thorough inspection and repair.

Black flecks in your coolant are usually indicative of:

Why Are There Black Flecks in the Coolant?

Corroded Radiator or Heater Core: Flaking off rust or degraded metal can mix with the coolant.

Contaminated Coolant: Old or improperly mixed coolant can break down and form particulates.

Debris: External contaminants can enter the cooling system during maintenance.

Addressing this issue promptly at G-Spot Engineering & Mechanical in Collinsville can prevent further damage to your vehicle’s cooling system.

Ignoring a leaking radiator can lead to serious consequences:

What Happens If I Don't Replace My Leaking Radiator?

Engine Overheating: Loss of coolant can cause the engine to overheat, leading to extensive damage.

Reduced Performance: Inefficient cooling affects overall vehicle performance.

Engine Damage: Prolonged overheating can warp the cylinder head or damage the engine block.

Increased Repair Costs: Minor leaks can escalate into major repairs if not addressed timely.

Visit G-Spot Engineering & Mechanical in Collinsville to replace your leaking radiator and avoid costly repairs.

A radiator flush is a maintenance procedure that involves:

What Is a Radiator Flush and Do I Need One?

Draining the Old Coolant: Removing the existing coolant and contaminants.

Flushing the System: Using a cleaning solution to eliminate residue, rust, and debris.

Refilling with Fresh Coolant: Adding new coolant to ensure optimal performance.

Regular radiator flushes can prevent overheating, improve efficiency, and extend the life of your cooling system. At G-Spot Engineering & Mechanical in Collinsville, we recommend a radiator flush based on your vehicle’s maintenance schedule and condition.

Checking your car’s cooling system involves several steps:

Inspect Coolant Levels: Ensure the coolant is at the proper level in the radiator and overflow tank.

Check for Leaks: Look for any signs of coolant leaks under the vehicle or around the engine bay.

Examine Hoses and Belts: Ensure hoses are free of cracks and leaks, and belts are in good condition.

Monitor Temperature Gauge: Keep an eye on the dashboard temperature gauge for signs of overheating.

Inspect the Radiator Cap: A faulty cap can affect the cooling system’s pressure.

Regular checks and maintenance at G-Spot Engineering & Mechanical in Collinsville can help keep your cooling system in top condition. 

For professional radiator and cooling system services, visit G-Spot Engineering & Mechanical in Collinsville today!

Discover common causes of radiator failure, milky coolant, black flecks in coolant, and more. Visit G-Spot Engineering & Mechanical in Collinsville for expert cooling system services.

Common Causes of Radiator Failure & Cooling System Issues | G-Spot Engineering & Mechanical in Collinsville

Common Causes of Radiator Failure & Cooling System Issues

Is your vehicle ready to take on the cold seasons ahead? As the chill sets in, it's time to talk about an essential component of your car that often goes unnoticed until it stops working – your car battery. Here at G-Spot Engineering & Mechanical, we're all about keeping your ride smooth and trouble-free, and today we're shedding light on why your car battery deserves a little more attention, especially when the temperatures drop.

First things first, let's talk about why cold weather is a real test for your car battery. As the temperature falls, the oil in your engine thickens. Your battery then needs to work harder to churn the engine to life. It's like asking someone to sprint in knee-deep surf; it requires a lot more effort. If your battery is showing signs of weakness, that sprint might just be too much, leaving you stranded with a car that won't start.

Moreover, cold temperatures can significantly decrease your battery’s efficiency. At 0°C, a battery loses about 60% of its strength, yet your vehicle needs twice as much power to start. It’s a double-edged sword that can lead to unpleasant surprises on chilly mornings.

Here’s a heads-up from the team at G-Spot Engineering & Mechanical: If your battery is over 3 years old, it’s time to start keeping a close eye on it. Batteries, like most things, have a life span, and as they age, their performance dips. We recommend testing your battery regularly once it crosses the three-year threshold. This small step can save you a ton of inconvenience down the road, ensuring that your vehicle is reliable when you need it the most.

If you're on the hunt for a new battery or want to ensure yours is still in peak condition, look no further. We’re proud stockists of ACDelco Batteries, which are sealed and maintenance-free, perfect for passenger vehicles, 4x4s, utes, vans, and SUVs. Plus, for those of you who live life on the go, we’ve got a selection of Deep Cycle batteries for Dual Battery Systems and a range of reliable Truck Batteries to keep your heavy-duty companions running without a hitch.

ACDelco Batteries at G-Spot Engineering & Mechanical

Got an urgent need? We've got your back! Batteries required urgently can be shipped overnight (though additional costs apply), ensuring you're back on the road in no time. Prefer planning ahead? We've got that sorted too, with a regular fortnightly delivery from our trustworthy Battery supplier.

If you’re ever in doubt about the condition of your battery, pop by G-Spot Engineering & Mechanical in Collinsville. We can hook your battery up to our Battery Load tester for a quick assessment. This nifty tool gives us an instant read on your battery's health, and if it’s time for a replacement, we can sort that out swiftly, ensuring you’re not left in the lurch.

Unsure About Your Battery’s Health? Let’s Test It!

Your vehicle's reliability starts with a robust battery and at G-Spot Engineering & Mechanical, we’re all about ensuring you enjoy a worry-free ride, regardless of the season. From premium ACDelco Batteries to comprehensive testing and timely replacements, consider us your go-to for all things battery-related in Collinsville. Contact one of our friendly team at G-Spot Engineering & Mechanical for all your battery needs. 

Ensure your car is winter-ready with top-notch battery checks and replacements at G-Spot Engineering & Mechanical in Collinsville. From ACDelco Batteries to urgent deliveries, we've got you covered.

Expert Car Battery Services in Collinsville | G-Spot Engineering & Mechanical

Did you know that Diesel engines have the highest thermal efficiency of all internal combustion engines (ICE) which means they tend to be more efficient than petrol engines? Efficiency aside, there are other factors that make diesel engines different to petrol engines.

How often should a diesel engine be serviced?

Because diesel engines suffer from carbon build up which can cause damage to the engine - it's important to stick to a regular service schedule, so any problems can be identified early. Neglecting to do so can lead to very expensive repairs.

Diesel vehicles have a different type of plug called a Glow Plug….What's a glow plug?

In a diesel engine a glow plug heats the cold fuel ready to be ignited under pressure, diesel engines don't use a spark to ignite like petrol engines.

Read more about Glow Plugs and the Diesel Ignition system here 

What oil should I use in my diesel - Do I need special diesel oil?

Yes. Oils that are created for use in diesel engines are different to oils for petrol engines, they have extra additives to help clean the engine and more.

Read More about Diesel Oils and Additives here 

You might have a worn or damaged turbo charger shaft seal, which could lead to bigger problems.

Find out more about why your Diesel Engine may be using more oil 

While certain models can be initially more expensive than a petrol vehicle and cost slightly more for quality servicing, in the long-term, diesel vehicles usually use up to 30% less fuel and have a longer engine life as well as lower CO2 emissions and greater towing abilities.

Learn more about Diesel engines if you have a diesel powered engine or are considering buying a diesel vehicle? Check out our Diesel FAQs to find out how diesel engines differ from petrol engines...

FAQs about Diesel engines by G-Spot Engineering & Mechanical

Call the experts at G-Spot Engineering & Mechanical for your Log Book Servicing needs.

A logbook service is a comprehensive maintenance routine prescribed by the vehicle's manufacturer, recorded in a logbook to maintain warranty and ensure optimal vehicle performance and safety. This includes checks and replacements of fluids, filters, and critical components to ensure optimal performance and safety.

We can perform fully qualified log book servicing on a wide range of makes and models including: Holden, Ford, Mazda, Toyota, Nissan, BMW, Audi, Hyundai, Honda, Kia - and many more.

Keeping up with your Log Book schedule helps to maintain your statutory rights to a new car warranty.

 We don't have to have a physical log book in order to do a Log Book Service - it just means we follow the manufacturers guidelines. We can certainly provide you with a log book to help you record your cars service history, which will be a benefit if you ever decide to sell your vehicle. Want to know more about 

Many people believe they must go back to a car dealership for New Car Log Book servicing in order to maintain the warranty. Actually, the ACCC have consistently confirmed that under Australian Law, you are free to have your car service carried out by a mechanic or service centre of your choice provided they are qualified to do so. See our video to learn more. 

New Car Warranties … the Facts.

Don't let small things become BIG things because a regular inspection has been missed. It's not worth the inconvenience. Let the experienced team at G-Spot Engineering & Mechanical make sure you are safe on the road.

Log Book service in Collinsville at G-Spot Engineering & Mechanical

New Car Log Book Service in Collinsville

Call G-Spot Engineering & Mechanical for all your diesel 4WD and diesel passenger vehicle repairs, inspections and services.

A diesel engine can be more efficient, better for the environment and cheaper to run than its petrol-powered counterpart.

However, it still needs regular servicing to keep it running at an ultimate level and to help make sure nothing goes wrong. Our technicians are fully qualified to service diesel 4wd and passenger diesel vehicles.

G-Spot Engineering & Mechanical can also help with DPF and EGR management, carbon cleaning, diesel fuel system problems and more - call us today if you have any questions.

Want to learn more about Diesel engines? Then visit Diesel Engine FAQs

Talk to one of our friendly staff to book in your vehicle for Service, Repair or Inspection during business hours on 07 4785 6800 or use our handy online booking form.

G-Spot Engineering & Mechanical are fully qualified to service and repair your Diesel car, 4WD, ute or truck. A diesel engine can be more efficient, better for the environment and cheaper to run than its petrol-powered counterpart.

Diesel Service and repairs in Collinsville

G-Spot Engineering & Mechanical are European Car Specialists

G-Spot Engineering & Mechanical have the expertise and knowledge to provide service, repairs and diagnostics on all European and Luxury vehicles including Alfa Romeo - Audi - BMW - Citroen - Ferrari - Fiat - Land Rover - Mercedes-Benz - Mini Cooper - Peugeot - Lexus - Porsche - Volvo and many more locally in our Collinsville car service workshop.

Why should I take my car to a European car specialist?

European cars are designed and built with distinctive craftsmanship, with finely tuned engines. A high level of specialised knowledge is required to service or maintain them to the standards they deserve. Cutting edge technologies often found in Euro or Luxury vehicles require cutting edge expertise.

We are members of the Repco Auto-Tech training program - Australia's leading provider of automotive technical training and information, so you are assured that G-Spot Engineering & Mechanical are fully versed with all modern vehicle servicing techniques. Through the Auto-Tech encyclopedia and SmartQuote programs G-Spot Engineering & Mechanical have unique access to the complete service schedules for all makes and models of Euro and Luxury Vehicles.

Our highly skilled technicians know exactly how look after the care of all Luxury and European Vehicles, from using European car specific software for diagnosis through to choosing the right quality parts for your vehicle.

If you're looking for an Audi service, an experienced BMW mechanic or someone to help protect your Luxury investment with qualified European car expertise contact G-Spot Engineering & Mechanical today.

G-Spot Engineering &amp; Mechanical have the expertise and knowledge to provide service, repairs and diagnostics on all European and Luxury vehicles including Alfa Romeo - Audi - BMW - Citroen - Ferrari - Fiat - Land Rover - Mercedes-Benz - Mini Cooper - Peugeot - Lexus - Porsche - Volvo and many more locally in our Collinsville car service workshop…

European car service in Collinsville

Differential bushings could be the issue if they are aged, worn or cracked.  They control movement in the joints, absorb road bumps and reduce vibrations and noise while driving or reversing. These are one of many automotive issue we can handle at G-Spot Engineering & Mechanical, your trusted local mechanic in Collinsville.

It is fair to say that the Ford Territory and Falcon are two of the most popular vehicles on Australian roads. Both of these models are prone to high rates of wear in some rear suspension components, such as the rear differential bushing. This is particularly apparent on vehicles that have travelled high kilometres, have high horsepower or vehicles towing loads regularly.

A tell-tale sign that this bushing is no longer performing as intended is hearing a clunking noise or feeling a jolt under acceleration or when shifting gears from drive to reverse. The primary function of the rear differential bushing is to provide a smooth and quiet transfer of power from the engine to the rear wheels of your vehicle under acceleration.

Should this issue go unresolved it may result in excessive wear on surrounding drive train and suspension components so it is wise and economical to act swiftly should you be experiencing any of these symptoms.

Your local Repco Authorised Service Centre G-Spot Engineering & Mechanical in Collinsville is experienced in diagnosing and fixing this problem. We can replace your worn rubber differential bushing with a highly durable Nolathane differential bushing specifically designed and manufactured to address this problem and return your vehicle back to its optimum performance.

So, if “clunking” goes with your Territory or Falcon, contact the team at G-Spot Engineering & Mechanical today.

It is fair to say that the Ford Territory and Falcon are two of the most popular vehicles on Australian roads. Both of these models are prone to high rates of wear in some rear suspension components, such as the rear differential bushing.

At G-Spot Engineering & Mechanical in  Collinsville we believe the transmission is an important part of your vehicle.

Without the transmission, your vehicle would not be able to move between gears. The transmission fluid allows you to do this smoothly and also protects the working parts inside your transmission. The transmission fluid doesn't diminish through use. Yet the level should still be checked periodically because if there is a leak, or the fluid level is low, it will harm the internal parts of your transmission.

Transmission fluid can become dirty over time with metal shavings and other particles which will shorten the life of your transmission. Replacing a transmission is a costly exercise and so checking the fluid and replacing it when necessary is a good investment in the long run.

At G-Spot Engineering & Mechanical we provide a full 65 Point Vehicle Condition Report upon request with every full car service - This includes a check of your transmission fluid and we will advise you if we think your fluid needs to be replaced or if a transmission service might be needed.

Call G-Spot Engineering & Mechanical for all your diesel 4WD and diesel passenger vehicle repairs, inspections and services. We are conveniently located in Collinsville.

A diesel engine can be more efficient, better for the environment and cheaper to run than its petrol-powered counterpart. However, it still needs regular servicing to keep it running at an ultimate level and to help make sure nothing goes wrong. 

Our technicians at G-Spot Engineering & Mechanical are fully qualified to service diesel SUV, AWD, 4WD and Passenger diesel vehicles. Contact us today.

Diesel Engine Service and Repairs in Collinsville

Diesel Repairs

MTAQ

AAAA

We advise that our workshop will be closed for the Christmas period from close of business Friday the 20th of December and reopening on Tuesday the 31st of December

We advise that the workshop will be closed over the Easter long weekend from 29th of March, reopening on Tuesday 2nd of April

We also advise that we will be closed Tuesday the 25th of April for ANZAC Day reopening Wednesday the 26th of April.

We wish to advise that we will be closed for the public holiday on the 2nd of October. Apologies for any inconvenience.

G-Spot Engineering & Mechanical take great pride in offering their clients personalised, and friendly service at all times. 
		
Conveniently located in Collinsville, the business is a member of the Repco Auto Tech training program, ensuring their technicians are kept fully up to date with modern vehicle repair methods. 
		
G-Spot Engineering & Mechanical have a wealth of experience in servicing all makes and models, including commercial fleet vehicles. As a Repco Authorised Service centre, they have a commitment to high quality workmanship, ensuring the very best in automotive care.

G-Spot Engineering & Mechanical

Diesel Repairs

Related articles

Radiator and Cooling System Service

Common Causes of Radiator Failure & Cooling System Issues

Understanding Car Batteries

Diesel Engine FAQs

Log Book Service in Collinsville

Diesel services in Collinsville

European and Luxury Car Service

Does clunking go with your territory?

Get into gear!